M90
M90
The M90 is a rigid malleable product that allow contact measurement for simple form impressions.
M90 is unique among malleable products in that it becomes rigid after curing. The final impression has a hardness of 90 Shore A, making it unable to deform when removed from the part.
This plastiform is only adapted for simple shapes without any extraction constraints.
The rigidity of M90 allows it to be measured with contact, which is useful for repeated indicative checks that do not require micron-level accuracy or for measurement using a CMM like machine.
This rigidity is also valuable for protecting fragile parts, as it prevents vibration and resonance.
M90 is recommended for creating rigid impressions of simple external shapes such as threads and grooves. It is typically used on medium to large parts.
- Removal Constraint : 0%
- Initial Consistency : Manual Putty
- Final Consistency : Rigid
- Final Hardness : 90 Shore A
- Working Time : 00:30 min.
- Curing Time : 04:00 min.
- Polymerization Time : 06:00 min.
- Double Blade Cutter : NO
- Measurements : WITH CONTACT
The M90 is adapted for:
- Dimensional control of simple external shapes: when you need to measure the impression using contact measurements,
- Reinforcement before machining: to reinforce a fragile part to protect it from a machining operation.
These applications do not require any particular technique to be performed by an operator.
To apply the product, mix both components properly by hand with a 1:1 ratio. Then, apply the M90 uniformly over the entire desired area before the polymerization advances too much.
The M90 impression is rigid and can be measured with or without contact using visual measuring systems such as profile projectors, microscopes, or optical measuring systems. It can also be measured with contact tools like calipers and three-dimensional machines (CMM etc.).
However, we recommend using a visual inspection system whenever possible, as the results are generally more efficient.
