Long Nozzle
Long Nozzle
Long nozzles are specially designed to apply products in 400mL cartridges. They are 170mm long and mix the two components with a 1:1 ratio, ensuring a completely homogeneous plastiform at the outlet.
This injector is exclusively used with 400mL cartridges, it wont work with any other product in 50ml cartridges or with bottles or cans of the XL products.
Its length allows it to easily reach the bottom of large cavities for replication, and its diameter does not obstruct the part entry. It is mainly used to control large-scale parts.
When the two components enter the injector, they mix and begin to polymerize, causing the product to start hardening. This is why you should take your whole impression in one time or you might have to use another nozzle.
If the product polymerizes inside a long injector, it becomes unusable and must be discarded.
Long nozzles are not compatible with tips at their end.
To attach the long injector to a 400mL cartridge, unscrew the cap from the cartridge and place the injector in its place before mounting the assembly on the DM-400 applicator gun or any other Plastiform dispensing material.
The part you want to check must be degreased with DN1, a Plastiform-validated degreaser.
Be careful, as soon as you pull the trigger, the mixing of the two components will start in the injector. Avoid wasting time with a product in the process of being mixed in your injectors.
