Needle Nozzle
Needle Nozzle
Needle Injectors are standard injectors for 50ml cartridges, equipped with a needle at the end to inject fluid products into very small parts.
They are small plastic and metal parts designed to mix two-component Plastiform cartridges. The injector ensures a perfect 1:1 ratio, making the output completely homogeneous.
Needle Nozzles are used only with certain fluid products (F20, F30 Visual, F50, and F85). Although they can be attached to all our cartridges, the fluidity of the product is crucial.
Their size allows them to reach the inside of parts easily, and their 0.89mm diameter enables infiltration into very narrow spaces, making them ideal for inspecting very small parts.
We recommend starting the injection only when you are fully prepared to perform all your checks. When the product enters the injector, it mixes and begins to polymerize within a few minutes.
Once the products have polymerized inside an injector or its needle, it is no longer reusable and must be discarded.
Needle injectors cannot be combined with white or yellow tips.
Before applying a plastiform, you must clean the application surface with DN1 degreaser.
The nozzle is attached to the end of the cartridge after you remove the cap. Simply push the nozzle and turn it to the left to lock it in place.
Once the nozzle is mounted on the cartridge, you can attach the assembly to the dispensing gun and start your application.
Tips cannot be used on the needle nozzles.
