F65
F65
F65 is a low-fluidity product designed for mechanical clearance controls of hard to access areas.
The final impression is semi-rigid (65 Shore A hardness) and inelastic. It poorly resists deformation when demolded, making it unsuitable for complex shapes. F65 impressions can withstand only up to 5% extraction stress.
This plastiform is ideal for mechanical clearance controls or creating custom seals, plugs, or masking joints. It is particularly useful for protecting parts during surface treatments.
F65 can be cut with the Double Blade Cutter to obtain cross-sections for easier analysis. This feature is helpful when detailed study of the replica is needed.
Its impression can be checked using a contact measuring system for soft materials (constant pressure caliper, etc.).
We recommend, however, that you always use a visual inspection system to obtain accurate values.
- Removal Constraint : 5%
- Initial Consistency : Fluid
- Final Consistency : Medium
- Final Hardness : 65 Shore A
- Working Time : 02:00 min.
- Curing Time : 06:00 min.
- Polymerization Time : 08:00 min.
- Double Blade Cutter : YES
- Measurements : WITHOUT CONTACT
F65 impressions can withstand only up to 5% extraction stress. It’s ideal for applications such as :
- Masking & Protection: protecting parts during surface treatments such as: Sandblasting and shot blasting, Chemical treatments, Heat treatments, Polishing, Anodizing or Chrome plating,
- Dimensional Control: F65 is designed to measure hard to access internal shapes with total or partial impression, especially mechanical clearance.
- Part Reinforcement: Its semi-rigid final hardness made it a good choice to reinforce a part against machining in some applications.
This product can also be measured with some contact measuring systems for soft material and is also cuttable with the Double Blade Cutter.
F65 is always sold with nozzles and tips.
